Ceado E7 Manuel D'utilisation page 28

28
ASSEMBLY OF THE TELESCOPIC PRESS (OPTIONAL) AND OF ITS
LONG SUPPORT FORK
Before performing any assembly operations, unplug the appliance.
If the standard press has already been installed (see previous paragraph and figures), remove
it following the inverse procedure to the one described for its assembly. Keep the removed
parts in a safe place.
To assembly the telescopic press (optional) and its long support fork, proceed as follows:
1
Remove the Ceado sticker from the doser (1, Fig. 13) and remove the support fork, undoing
the retaining screws (2, Fig. 13). Keep these screws in a safe place.
1
2
1
2
1
Fig. 13
Fig. 15
3
2
GB
Fig. 14
Fig. 16