Mounting - Sonnenkonig SOLE Mode D'emploi

03 - MOUNTING

1. The heater must be installed by a qualified electrician.
2. Place the heater on a solid, level ceiling surface; install the
heater on a stable, rigid support (e.g., solid wood beams or
metal rails, etc.).
3. The ceiling hook that suspends the patio heater must be able
to support 3 or 4 times the weight of the patio heater itself.
4. Place hook A around the ceiling hook and attach any chain
ring to adjust the height of the patio heater to the floor.
5. The distance from the bottom of the patio heater to the floor
should be greater than 5 feet.
6. Connect the patio heater to a 15 amp, 220-240 V, 50 Hz,
grounded electrical outlet.
7. Only operate the unit when it is in the upright position.
Chain
Heating
element
ON/OFF switch
Heater cover
Protective grid
Ceiling
50.8 cm
180cm
Floor
25.4cm
Wall
EN
35