Laerdal Resusci Anne Simulator Mode D'emploi page 7

Get Started
Remove Thigh Pad
and insert bolt
through hole in pelvis.
Slide washer and wing
nut back over bolt.
Reattach pelvis,
with legs, to torso.
Reconnect tubing
between pelvis and
torso and place in
grove.
To remove legs, reverse procedure.
7
Remove wing nut
and washer from bolt
inserted in leg. Spring
assembly remains in leg.
Use screwdriver to
secure screw while
driving bolt into wing nut.
Replace bolt
connector to
secure.
Slide loose wires/tubes
down into pelvis.