Laerdal Resusci Anne Simulator Mode D'emploi page 17

Maintenance
Ventilation
•
Lubricate airway with two or three sprays prior to starting your training session.
•
Lubricate airway management tools liberally prior to starting intubations. Consider whether
additional lubrication is needed later in the session.
•
Use only lubrication provided. Do not use silicon or other lubricant, as this may damage manikin.
Note
Head contains electrical components. Due to inability to sanitize airway, mouth-to-mouth/
mouth-to-mask ventilation should not be performed.
BP arm assembly and disassembly
For transportation using hard case you must disassemble BP arm.
Press grooves to
release arm and
expose cable.
Detach cable.
Remove arm.
To reassemble, reverse procedure.
Reattach chest skin.
Ensure grooves on bolt fit properly into hole on torso.
17