Table des Matières
Publicité
TOOLS
3 Preparation
3.1 Transport
To prevent back injury, heavy parts (or units), must be moved by
two persons or more.
The units are generally too heavy to be moved by hand. Therefore,
use the correct transport and lifting equipment. The weights and
dimensions of this machine (unit) are shown on the label.
During moving the machine, please make sure to use the proper
lifting equipment and follow the instructions as follows.
3.2 Working area
Users should provide enough space for the equipment and the
environment should be clean, non-flammable, corrosive and
dust free.
A working area of 1,000 mm is to be kept free both in front
of and behind the machine while it is in operation so that it is
always easily accessible.
3.3 Unpacking and check
•
When open the packing, please make sure to use the proper tools, wear protective cloth, gloves, safety helmet
•
Make sure that the product and parts in box should be complete and identical with the part list. If not, please contact the
dealer immediately.
•
The packaging of these machines consists of PVC film and plywood case. The proper disposal of the packaging is the
responsibility of the customer.
3.4 Installation
WARNING!
The machine must only be installed and commissioned by qualified personnel!
All relevant safety regulations must be strictly adhered to!
3
Preparation
3.1
Transport
To prevent back injury, heavy parts (or units), must be moved by two persons or more.
The units are generally too heavy to be moved by hand. Therefore, use the correct transport and lifting eq
weights and dimensions of this machine (unit) are shown on the label in clause 3.
During moving the machine, please make sure to use the proper lifting equipment and follow the instructio
Forklift truck
Forklift truck
757170520GBNLF
GB
3.2
Working area
Users should provide enough space for the equipment and the environment should be clean, non- ammabl
and dust free.
A working area of 1,000 mm is to be kept free both in front of and behind the machine while it is in opera
is always easily accessible.
v1.0 02052012
3.3
Unpacking and check
•
When open the packing, please make sure to use the proper tools, wear protective cloth, gloves, safet
•
Make sure that the product and parts in box should be complete and identical with the part list. If not,
the dealer immediately.
•
The packaging of these machines consists of PVC lm and polywood case. The proper disposal of the
the responsibility of the customer.
3.4
Installation
The machine must only be installed and commissioned by quali ed personnel!
All relevant safety regulations must be strictly adhered to!
14
v1.0 02052012
PPH50B - NLFREN - v1.0.1 - 21042017
EN
Publicité
Table des Matières
