HTW SA1 Serie Manuel D'installation page 12

4. INSTALLATION
A. Installing on the concrete wall:
4.1.1 Removed the mounting plate
Remove the plastic parts, unclamping the
fixed screws on the back of main body to re-
move the mounting plate.
MOUNTING PLATE
PLASTIC PARTS
4.1.3 When the cement has freeze, fit the
mounting plate (use the washer and nut ac-
cording to the following)
B. Installing on the wooden wall
4.2.1 Fix the mounting plate in the proper po-
sitions with tapping screw.
4.1.2 Fix the bolts in the proper position (fix
the position with the mounting plate and pour
cement into the bolt holes.)
2
1
1 2
4.1.4 Install the main body
Set the main body onto the upper end of the
mounting plate, and clamp it as below. Make
sure it's well fixing
4.2.2 Same as the step 4.1.4.
3