View Last Test Results; Maintenance; Cable Set Replacement - Midtronics inCHARGE 940 INC-940 Manuel D'instructions

VIEW LAST TEST RESULTS

1. After selecting this option use the ARROW buttons to scroll through screens showing:
a) The battery rating you selected in your setup
b) The test code (if available)
c) The measured voltage and CCA, and the final result.
2. Press the INFO ( i ) button to return to the Information menu.
If you turn off the inCHARGE940 or disconnect the clamps, the inCHARGE940 will save the last test
results in memory for viewing until you start a new battery analysis/charging session. To view the
last test results before the next session, press the INFO ( i ) button when the message CHOOSE
CHARGE MODE appears. Use the ARROW buttons to scroll to VIEW LAST TEST RESULTS, and
press ENTER.
To ensure that the inCHARGE940 operates properly:
• Clean the display with a solution of water and mild detergent.
• Inspect and clean the clamps after every use. Liberally apply baking soda and water with a
clean cloth and thoroughly rub the jaw and spring. Rinse with water and let dry. Use a soft wire
brush to remove corrosion.
• Never allow the clamps or cables to lie in the battery tray.
• Immediately clean up any acid spills with a mixture of water and baking soda.

CABLE SET REPLACEMENT

Midtronics offers a replaceable cable set with installation instructions. Call Midtronics to order P/N A078.

MAINTENANCE

- 14 -