Initial Setup; Dealer Number; Date And Time; Options Menu - Midtronics inCHARGE 940 INC-940 Manuel D'instructions

INITIAL SETUP

Before you can begin using the inCHARGE940, you must enter your dealer information, and verify the
date and time. NOTE: After you complete the initial setup, you will have a chance to make revisions
before exiting. If you enter the incorrect dealer information or time in the initial setup, you can revise
your entries using the Options menu. (See "Options Menu" below.)
NOTE: If you inadvertently change the date from its correct setting during the initial setup, it cannot be
changed after inCHARGE940 restarts. You must return the inCHARGE940 to Midtronics to have the
date reset. (See "Patents, Limited Warranty, Service" for more information.)

DEALER NUMBER

When you turn on the inCHARGE940 for the first time, a screen appears requiring you to enter a DEALER
REGION. Use the ARROW buttons to scroll to USA, CANADA, or OTHER, and press ENTER to select.
The next screen will require a DEALER NUMBER. The cursor (a horizontal line) will be positioned below
the first alphanumeric character. Use the ARROW keys to scroll to the correct character
(0–9, A–Z) and press ENTER.

DATE AND TIME

NOTE: The date cannot be set outside of the initial setup. If the date is incorrect, you must return the
inCHARGE940 to Midtronics to have it reset. (See "Patents, Limited Warranty, Service" for more
information.)
The next screen will require you to verify the date and time. The cursor will be positioned under the
month segment. To make changes, press ENTER to move the cursor forward (it cannot be moved back)
to the segment you want to change (month, day, year, hour, or minute). Use the ARROW buttons to
scroll to the correct number, and press ENTER to select it and move to the next segment. When
finished, press ENTER after the cursor is positioned under the minutes segment.
The next screen, which shows the new date and time, enables you to accept or revise your entries.
To accept, use the ARROW buttons to scroll to ACCEPT, then press ENTER. The inCHARGE940 will
restart and be ready to begin battery testing and charging.
To revise, press the ARROW buttons to scroll to REVISE, then press ENTER. The DEALER REGION
screen will reappear enabling you to start over. Press ENTER to move past the screens containing the
correct information.

OPTIONS MENU

You can change the following in the Options menu:
•

Set Time

• Printer Type (HP82240B, IrDA, or SERIAL)
• Dealer Number
• Language (used in the user interface and on printed test reports)
To display the Options menu, turn on the inCHARGE940 while pressing and holding the INFO ( i )
button. Press the ARROW buttons to scroll through the options, and press ENTER to select:
SET TIME
The cursor will be positioned under the hour segment. To change the hour, use the ARROW buttons to
scroll to the correct number, and press ENTER to accept it and move to the minutes segment. When
finished, press ENTER.
- 8 -