Printer Type; Dealer Number; Language; Pre-Analysis Battery Inspection - Midtronics inCHARGE 940 INC-940 Manuel D'instructions

NOTE: The date cannot be set outside of the initial setup. If the date is incorrect, you must return
the inCHARGE940 to Midtronics to have it reset. (See "Patents, Limited Warranty, Service" for more
information.)

PRINTER TYPE

Select HP82240B, IrDA, or SERIAL. The inCHARGE940 has an infrared sensor and a serial
connector for the printer options.

DEALER NUMBER

a) DEALER REGION: Select USA, CANADA, or OTHER, and press the ENTER button.
b) DEALER NUMBER: The cursor (a horizontal line) will be positioned below the first
alphanumeric character. Use the ARROW keys to scroll to the correct character (0–9,
A–Z) and press ENTER to move the cursor forward (it cannot be moved back) to the
character you want to change.

LANGUAGE

You can select English, French, or Spanish as the language used in the display and on printed reports.

PRE-ANALYSIS BATTERY INSPECTION

Before using the inCHARGE940, inspect the battery for damages and check for:
• A cracked case or broken terminals. Replace the battery.
• Cracked or broken cables and connections. Repair or replace as needed.
• Corrosion on the battery terminals, and dirt or acid on the case top. Clean with a mixture of
water and baking soda and a wire brush.
• Loose battery cable connections and battery hold-down assembly. Repair or replace as needed.
Side-terminal batteries must be tightened before testing.
- 9 -