Troubleshooting; Disposal; Technical Data; Power Adapter - Conrad 75 10 59 Mode D'emploi

10. Troubleshooting

Fault
The device doesn't work. Image and sound are not
available.
Image and sound are distorted.

11. Disposal

In the interest of our environment and in order to recycle the raw materials used as completely as possible, the
consumer is asked to bring used and defective devices to the public collection locations for electrical scrap.
The sign of the crossed-out refuse bin with wheels means that this product must be taken to a collection location for
electronic scrap in order for the raw materials to be reused by means of recycling.
In this way, you fulfill your legal obligation and contribute to protection of the environment.

12. Technical data

Operating voltage:
Current consumption:
Image format:
Microphone:
Light sensitivity:
Resolution:
Length of lines:
Working temperature:
IR LEDs:
IR activation:
Weight:
Dimensions (L x W x H):

Power adapter

Input voltage:
Output voltage:
camera
1/3" CMOS (colour)
integrated into the camera
<3 lux
330 lines (horizontal)
ca. 18 m
-10 C to +50 C
o o
11
EDS
approx. 127.3 g
100 x 38 x 40 mm (without aerial)
Possible solution
The LCD display does not have any power.
- Turn the monitor on.
- Check the functionality of the network connection (sockets,
fuses, circuit breakers, etc.).
- Check all plugs and the functioning of the power supply unit.
The input voltage is too low. Check all contacts and the power
supply unit for sufficient output power.
LCD monitor
12 V/DC
700 mA
480 x 234 pixels
approx. 595.5 g
184 x 52.7 x 127 mm
100 – 240 V/AC, 50/60 Hz
12 V/DC, 1 A
19