PNI Escort Start 360 Manuel D'utilisation page 34

Masquer les pouces Voir aussi pour Escort Start 360:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 61
25. Features selectable Bby Jumper
Jumper table (factory setting)
P1 Non-Tach mode
P2 Door Trigger (-)
P3 Power Central Door Lock
P4 Engine Disable
P1: The factory setting is Non-Tach mode. When it is in Tach mode, the purple wire of 5P
must connect to the wire of Tach.
P2: select this option according to your vehicle
P3:select this option according to your central lock system
P4: select this option according to your desired functioning mode
26. Tachometer learning
The purple line ( from 5 pin wire) is for detecting the remote start , after it's
connected to tachometer sensor, different engine running speed value will be displayed
according to different car makes or models, thus the value must be restored into the
system.
A. Turn the ignition key to ON;
B. Step on the brake pedal;
C. Stay on neutral gear position;
D. The parking lights flash once (for 2 seconds) after pressing the override switch 5
seconds;
E. Use the ignition key to start the engine(noted: don't step on the gas);
F. Press the button twice continuously;
G. Tachometer learning will finish with the parking lights flash 3 times in 2 seconds. The
ignition key can't be drawn out before it finishes. The parking lights will flash 5 times if
the learning fails.
27. Automatic Door Lock/Unlock
Central door lock will automatically lock when stepping on brake pedal 15
seconds after turning ignition key to "ON" position and doors closed. Central lock will
automatically unlock when the ignition key is removed. If any of the doors is not closed
when stepping on the brake pedal 15 seconds after turning ignition key to "ON" position,
the parking lights will flash once and the siren will chirp 3 times to remind the user, and
the doors will not lock. There is no reminder again. Step on the brake pedal 15 seconds
after closing the door(s), the central lock will lock.
You can also lock/unlock the doors by pressing
while driving.
28. Power Window Trigger Output
On the occasions that the user forgets to close the windows when he or she
arms the alarm, this function will close all the windows automatically to prevent the
accidental loss. The function of automatically close the open window is available when
the vehicle is equipped with power windows and window closer module.
Tach mode
Door Trigger (+)
Vacuum Type Central Door Lock
Engine Enable (Anti-Hijack Mode)
or
33
33
on the Remote Control
EN

Publicité

Table des Matières
loading

Table des Matières