Display Description - PNI Escort Start 360 Manuel D'utilisation

4. button
- press this button to locate your vehicle
5. button
- when the engine is on press this button for 3 sec to open trunk
- when the system is armed press this button 2 times to start engine. Press it again to
stop engine.

DISPLAY DESCRIPTION

Arm/
Lock
Unlock
trunk
While the system is in any state, press
the remote control will be turned on /off.
NOTE: Please turn on the remote control before using it. The remote control is
equipped with power switch and it was turned off in the factory for power saving
purpose.
Remote control power on/off
- to turn the remote control ON long press
confirmation sound. Release button. The remote control LEDs will light one by one then
the icons will appear on the screen. Now you can use your remote
- to turn the remote control ON long press
confirmation sound. Release button.
Icons
Time
Disarm/
Unlock Silent mode
Shock trigger
Battery level
Arm with
light/sound
Signal indicator
and at the same time, the vibrator in
button until you will hear a
button until you will hear a
23 23
Vibrate on
Parking light Car door
flash
Time Start engine
EN
open