Cleaning And Maintenance - Blumfeldt 10035366 Mode D'emploi

EN
30

CLEANING AND MAINTENANCE

To enjoy years of outstanding performance from your appliance, regular
services of the appliance is mandatory as followings:
• The appliance should be inspected before at least one time a year by a
Qualified Service only.
• More frequent cleaning may be required according to the use of the
appliance.
• Any guard or other protective device removed for servicing the appliance
must be replaced before operating it.
• Keep exterior surfaces clean, free and clear from combustible materials.
• Use warm soapy water for cleaning. Never use flammable or corrosive
cleaning agents.
• While washing your unit makes sure to keep the area around the burner
assembly dry at all times. If the gas control is exposed to water in any
way, DO NOT try to use it. It must be replaced.
• Burner and LPG compartment circulating air passageways of the
appliance must be kept clean.
• Airflow must be unobstructed. Keep controls, burner and circulation air
passageways clean.
• Signs of possible blockage include:
• Gas odor with extreme yellow tipping of flame / Appliance glow is
excessively uneven / Appliance
• makes popping noises.
• Spiders and insects can nest in burner or orifices. This dangerous
condition can damage the
• appliance and render it unsafe for use. Clean burner holes by using a
heavy duty pipe cleaner.
• Compressed air may help clear away smaller particles.
• Carbon deposits may create a fire hazard. If any carbon deposits develop,
clean dome and engine with warm soapy water.
• After the burner and lava rocks are completely cooled down, remove it
from the bowl and use a soft brush to get rid of the mild stains, loose dirt
and soil. Wipe with a soft cloth.
• Clean the bowl and afterward put lava rocks again in proper position.
• For proper cleaning, a vacuum cleaner can be used.
Note: In a salt-air environment (such as near the sea), corrosion occurs more
quickly than normal. Frequently check the corroded areas and repair them
promptly. Stubborn stains, discolouration and possibly rust pitting can occur
from exposure to harsh outdoor conditions. Be careful not let any powder
or solvent come in contact with painted or plastic components as damage
may occur. After long use, some discolouration can come up and it screen is
normal.