Blumfeldt 10035366 Mode D'emploi page 23

ASSEMBLY
Please read these instructions carefully before assembly and use.
Find a large, clean area to assemble your appliance. Please refer to the parts
list and assembly diagram as necessary.
• Assembly of the appliance involves many large components; it is advisable
to have two people assemble the unit.
• Please use protective gloves when assembling this product.
• To avoid losing any small component or hardware, assemble your product
on a hard level surface that does not have cracks or openings.
• To avoid damage to soft floor or carpet, do not assemble or move the
appliance on soft floor or carpet.
• Follow all steps in order to properly assemble your product.
• Make sure all the plastic protection rip off before assembling.
• Do not force parts together as this can result in personal injury or damage
to the product.
• When applicable, tighten all hardware connections by hand first, once the
step is completed, go back and full tighten all hardware.
• Make sure that the ventilation openings on the top and bottom of
the unit are not blocked and that ventilation is ensured at all times by
maintaining the minimum distances mentioned above.
Caution: Whilst every effort has made in manufacture of your appliance
to remove any sharp edge, you should handle all components with care to
avoid accidental injury.
EN
23