Blumfeldt 10035366 Mode D'emploi page 28

EN
28
• To operate you will need a precision-filled standard G30/G31 grill LP gas
cylinder with external valve threads.
• Use standard flexible tube with length less than 0.3 m. The tube shall be
readily visible across its entire length for inspection after installation.
• Danger: You must have the proper regulator and bottle in order for the
appliance to operate safely and efficiently. Use of an incorrect or faulty
regulator is dangerous and will invalidate any warranty.
• Position a gas cylinder inside the tank housing.
Connect the hose via the regulator.
Figure 1 – Illustrates the Hose connected to the supplied regulator and
fastened with the clamp.
Figure 2 – Placing the supplied regulator into the gas cylinder.
Disconnect LP Gas cylinder
Before disconnecting make sure the LP gas tank valve in "CLOSED"
Disconnect gas line from LP gas cylinder by turning knob counterclockwise
until it is loose.