The Output Module 2 X Rel; Functions - Aquametro CALEC energy master Instructions De Montage Et D'utilisation

11.3 The Output Module 2 x Rel. 24V/Analogue
11.3.1 Function and connections
The module has two universal outputs which can be operated as relay and current outputs.
The wiring of the signal cables on the terminals depends on whether the internal or external power
supply is used:
Operation module Note
Active Use of internal power supply from the module
Passive Use of an external power supply
The integrated output power supply is short-circuit proof and can be loaded with 25mA per output.
The module recognises an overload of the power supply. Each output, including output power supply,
is galvanically isolated.

11.3.2 Functions

For each universal output, one of the following functions can be selected:
Function Application
Inactive Output without function
Pulse Output of meter value pulses
Status Output of a status signal
Limit value 1 Output of a type 1 limiting value violation
Limit value 2 Output of a type 2 limiting value violation
0 - 20 mA Analogue output 0 – 20 mA
®
CALEC energy master installation and operating instructions
Terminals
Note
Pulse output application
e.g. device alarm
Value is above or below a limiting value
Value is in a range between or outside of the
two limiting values
Analogue output, interrupt cannot be detected
by module with analogue input
86 - 50
87 - 52
50 - 51
52 - 53
23