Cleaning And Disinfecting The Cutting Head - Active TIGERCUT 40 Manuel D'utilisation Et D'entretien

5
9
13
17
21

Cleaning and disinfecting the cutting head

The cutting head can be cleaned to remove any residue (dust, dirt, etc.).
For this operation it is recommended to use a clean cloth with non-abrasive and
non-corrosive detergents. It is also possible to disinfect the cutting head to prevent
any disease spreading on the wood. To do this, we recommend to avoid the use of
corrosive products that coul also damage the device. Don't hesitate to contact us
so that we can assist you in selecting your products.
6
10
14
18
Screw counterclockwise
22
23
7
11
15
0.2N.m
19
0.2N.m
23
8
12
16
20
24