Use, Maintenance And Precautions Of Battery Battery Charging - Active TIGERCUT 25 Manuel D'utilisation Et D'entretien

Use, Maintenance and Precautions of Battery Battery
Charging
The battery of the new product is not fully charged. Place the battery on the
desktop, insert the charger output jack into the battery socket, as illustrated in Fig.
1 and then plug the charger plug into the power socket. When the indicator light
lights up, charging starts.
When the indicator light of the charger is red, it indicates that the charger is
charging; when it is green, the charging is done and the battery can be used.
Charging steps:
1. Place the battery on the desktop and insert the charger plug into the battery, as
shown in Fig. 1;
2. Plug the charger into a power outlet;
3. When the indicator light of the charger is red, it indicates that the charger is
charging; when it's green, the charging is complete and the battery can be used.
Precautions: Each indicator light represents the charging state of one USB.
This charger has three/two port, as illustrated in Figs. 3-4. Two-port and
three-port chargers are optional based on the model of the product you
purchase.
Please use the charger included for charging, on which there is an indicator
light corresponding to each charging plug (whether for individual charging
or multiple charging, please refer to the indicator light on the charger to
determine if charging is completed. The charger adopts a sequential
charging method instead of simultaneous charging.)
Note: Whether the battery is connected or the power supply is not connected,
the indicator light is green.
20