Value
Description
Power Fail
Enable / disable continue charging
Continue
process after power failure
The charging process continues after
a power failure
A power failure terminates the
charging process
Autostart
Enable / disable autostart of charging
Charging
process
The charging process starts
automatically when connected to a
vehicle.
The charging process must be
started manually when connected to
a vehicle.
This setting will be ignored with
RFID card reader enabled.
Enable Stop
Enable / disable stop button.
Button
Stop button enabled
Stop button disabled
Color Schema
Setting the colour scheme of LED info
bar
Enable RFID
Enable / disable audible feedback of the
Beep
RFID card reader.
Audible feedback enabled
Audible feedback disabled
Enable WLAN
Enable / disable WLAN module.
Communication
WLAN module enabled
WLAN module disabled
AMTRON
Selecting the operating mode of the
Operation
charging station.
Mode
See Chapter 4.4 on page 12.
Value
Description
STA SSID
Name of the WLAN the charging station
is connected to.
STA Connected
Status of the WLAN connection.
true: Charging station is connected
to a WLAN
false: No connection of the charging
station to a WLAN
STA Security
Selecting the WLAN encryption.
Mode
Default setting: "Autodetect security
mode"
STA Security
Entering the WLAN security key.
Key
AP Security
Selecting the WLAN encryption when
Mode
charging station is operated in access
point mode.
AP Channel
Selecting the WLAN channel when
charging station is operated in access
point mode.
AP Country
Selecting the country code when
Code
charging station is operated in access
point mode.
Local
Display / enter the current system time
Timestamp
of the HC controller in Unix timestamp
format.
Currently
Selecting daylight saving time / standard
Summer
time
Daylight saving time
Standard time
Timezone
Enter the difference between the local
Offset
time zone and UTC time in minutes.
SW Reset
Software reset
Click on the button "Reset" to restart
the HC controller of the charging
station.
26