Build Worker BG2800R Manuel D'utilisation page 44

2．Checks before Operating
(1) Check the engine oil level
Notice:
Stop the generator in a smooth place, then check the generator.
Engine oil is a major factor affecting engine performance and life.
Use the 4-stroke oil, SAE10W-40 is recommended
for general, all-temperature use. Other viscosities
shown in the chart may be used when the average temperature
in your area is within the indicated range.
① Uncover the oil mouth then clean
the engine oil ruler with clean cloth.
② Plug the engine oil ruler into the oil mouth
and don't turn it. If the oil level is below
the lower limit of the engine oil ruler you
should add some engine oil.
③ Add the engine oil to the upper limit of ruler.
④ Fix the engine oil plug ruler properly.
(2) Check the fuel level
Check the fuel gauge, and refill the tank if the fuel level is low.
Use the 93# unleaded gasoline or higher
① Uncover the fuel tank cap.
② Check the fuel level, if the fuel level is
low you should add more.
③ Add the fuel to the shoulder part of
fuel filter.
3