Abus HDCC50000 Manuel Utilisateur page 33

NEGATIVE IMAGE: Display the video image as a negative.
MOTION The internal motion detection can control recording on the HD-TVI DVR or the
camera's internal digital zoom function.
OFF: Deactivate the function
ON:
AREA SELECTION (1~4):
AREA DISPLAY (ON/OFF):
SENSITIVITY (0~100):
MOTION IND. (OFF/ON):
STANDARD:
PRIVATE ZONES This function allows private zones to be set up in the video image to protect
areas that are not to be monitored.
AREA SELECTION (1~8): Selection of an area for the configuration
AREA DISPLAY (OFF/INV./COLOUR/MOSAIC):
POSITION:
SIZE:
COLOUR (0~15):
RATIO/TRANSPARENCY (0~3):
STANDARD:
DEFECT Function for correcting defective pixels in the image sensor
LIVE (ON/AUTO/OFF):
STATIC DPC (ON/OFF):
RS485 Settings for the RS-485 bus communication (on-screen display control)
CAMERA ID:
ID DISPLAY (OFF/ON):
BAUD RATE:
RETURN Return to previous menu screen
Activate the function
Change the position of the mask
Change the size of the mask
Colour selection (only for marking type COLOUR)
Reset all settings made to this function.
Active continuous correction of pixels
Static correction of defective pixels on restart
Configuration of BUS ID (Standard is ID=1, various
IDs assigned for multiple devices)
Display of camera ID in live view
The position of the display can additionally be set
on activation (ENTER)
Baud rate setting for the RS-485 bus
Selection of area (max. four)
Activate/deactivate the preview frame. The
position and size of the area can be changed
using the ENTER button.
Sensitivity for motion detection.
A mark is displayed in the corresponding area
in the live view when motion is detected.
Reset all settings made to this function.
Selection of marking type.
Press ENTER for:
Intensity of the colour display
(transparency)
.
33
English