Camera Description; Mounting/Installation; Mounting The Camera - Abus HDCC50000 Manuel Utilisateur

4. Camera description

1 Lens mount with CS mount lenses
2 Microphone
3 Analogue video output (BNC, for service purposes, labelled 'CVBS', only on WDR off)
4 HD-TVI video output (BNC, labelled 'TVI')
5 Joystick for controlling the on-screen display
6 LED for operating voltage display
7 Earth connection
8 Power supply connection (12 VDC or 24 VAC, 2-pin connection)
9 Connections for switching input, switching output, day/night switching, RS-485 (on-screen
display control)
IN: Switching input (via jumper to "G")
G: Ground
D/N: Day/night switching (via jumper to "G", jumper closed = night)
OUT: Switching output (via jumper to "G")
D: Control line RS-485-
D+: Control line RS-485+

5. Mounting/installation

5.1. Mounting the camera

IMPORTANT!
The camera must be disconnected from the power supply during installation.
Threaded holes (1/4 inch) are located on the top
and bottom of the camera (1) for mounting the
camera mount and/or fixing the camera in place.
For the lens, there is a lens control connection on
the side.
26
English