Publicité
GB
Genuine - Part - No. : PZ401-J0551-00
IMPORTANT REMARKS :
The standard fixing points of the vehicle which the vehicle manufacturer indicates and which are
approved in the general vehicle licence are complied with.
The attachment dimensions and clearances specified in appendix VII, illustration 30 of the Directive
94/20/EG are complied with..
Re-tighten all the securing bolts of the towing bracket after towing a trailer about
1000 km.
These fitting instructions must be attached to the vehicle documents.
This towing bracket and tow ball, including all minor components necessary for fitting, weighs 28 kg.
Please bear in mind that the unloaded weight of your vehicle will be increased by 28 kg when the
towing bracket has been attached.
Installation of the mechanical connection must be checked in accordance with the specifications in
Appendix I, No. 5.10, as per requirements of Appendix VII of Guideline 94/20/EC.
Install electrical system in accordance with DIN V72570 / ISO11446.
The ball coupling should be kept clean and greased.
Check the diameter of the ball from time to time.
As soon as a diameter of 49 mm exists at any point, the coupling ball with bracket must no longer
be used for safety reasons.
Right to modify the text reserved.
2
Publicité
