TRENDY
54 03 42xx-4D
Step 8 : Use the parts of step 8, the pairs of drawer runners ZL and ZR and twenty-four bolts J
Position the sliders (ZL and ZR) in front of the provided holes of the inner side and end sides. Push a bolt
(J) through the front third hole on the runners and tighten. Now insert the other bolts and tighten them in
the sides.
Step 9 : Use the drawer parts from step 3 and 4, four drawer bottoms DR4 and sixteen wood screws F
Place a drawer back (DR3) with the groove facing inwards between the sides (DR2L and DR2R). Push
two wood screws (F) into the provided holes behind each side and tighten them in the back. Slide a drawer
bottom (DR4) into the slots on the sides and back.
Commode met vier laden
Kommode mit vier Schubladen
Commode avec quatre tiroirs
Chest of four drawers
Quax
First dreams
®
First steps
39