Quax TRENDY 54 03 42-4D Serie Manuel page 37

TRENDY
54 03 42xx-4D
Step 5 : Use the bottom 7 and the intermediate side 4 of step 4 and three wood screws F
Push the intermediate side (4) with its wooden dowels into the provided holes of the bottom (7). Push the
wood screws (F) through the drillings of the bottom and tighten in the intermediate side.
Step 6 : Use parts (excluding those for the drawers) of steps 3, 4 and 5, the lower back 6, nineteen ec-
centrics C and two wood screws H
Push the eccentrics (C) in the provided drillings on the inside of the upper back (3), the intermediate side
(4), the end sides (2L and 2R) and the bottom (7). Push the lower back (6) in the groove of the bottom.
Place the upper back (3) on the lower one. Push the crossbar (5) with its dowels in the left side (2L). Push
the left side with its connectors in the holes and over the dowels of the bottom and the ones of the upper
back. Tighten the eccentrics. Repeat with the right side (2R). Push the top (1) with its connectors into the
holes and over the dowels of the intermediate and end sides. Tighten the eccentrics. Push the remaining
wood screws (H) into the supports (G) and screw them into the top.
Commode met vier laden
Kommode mit vier Schubladen
Commode avec quatre tiroirs
Chest of four drawers
Quax Quax
First dreams First dreams
® ®
First steps First steps
37