LOUISE
TRENDY
Quax
Quax
First dreams
®
®
First steps
Step 3 : Use the top 1, the drawer fronts DR1-A and DR1-B, the upper back 3, twenty-fi ve connectors B, four
wooden dowels A, two supports G and two wood screws H
Tighten four connectors (B) in the drillings on the inside of the drawer fronts (DR1-A and DR1-B). Tighten nine
connectors (B) into the holes underneath the top (1). Push four wooden dowels (A) in the holes provided at the
ends of the upper back (3). Place the supports (G) on the provided drillings on the inside of the back and fasten
with a wood screw (H).
Step 4 : Use the bottom 7, the crossbar 5, the intermediate side 4, the end sides 2L and 2R, the drawer backs
DR3, the drawer sides DR2L and DR2R, ten connectors B and fourty-six wooden dowels A
Push six wooden dowels (A) in the provided drillings at the ends of the bottom (7). Push four wooden dowels (A)
in the holes at the ends of the crossbar (5). Push six wooden dowels (A) in the holes at the ends of the intermedi-
ate side (4). Push three wooden dowels (A) in the openings at the top of the end sides (2L and 2R). Tighten fi ve
connectors (B) in the drillings on the inside of the end sides. Push two wooden dowels (A) in the holes on the
ends of the drawer backs (3). Insert two wooden dowels (A) into the holes on the front of the drawer sides (DR2L
and DR2R).
36
Commode met vier laden
Kinderbed met verstelbare bodem
54 03 42xx-4D
01 01 43XX
Kommode mit vier Schubladen
KInderbett mit verstelbarer Boden
Commode avec quatre tiroirs
Lit enfant avec fond réglable
Chest of four drawers
Babybed with adjustable bottom