Operating Logics - Aprimatic Slide 230 Instructions D'installation, D'utilisation Et D'entretien

4. FUNCTIONING
4.1

Operating logics

AUTOMATIC mode (default logic) (
The complete operating cycle is a follows : START with the gate closed
the PAUSE TIME set closes at the end of the pause time.
See the following Tables to know all the Operating logics and the responses to the controls and input signals during the functioning cycle.
!
Warning
OBSTACLE - regardless of the operating logic, if an obstacle is detected during a movement, the
automation immediately stops, then the movement is reversed for 2 sec. Until the obstacle remain, the motion is inhibited.
After the obstacle is removed a START pulse is required to operate again.
LEGEND:
locks 1 : START causes immediate closing
locks 2 : movement will be completed when the photocell will be uncovered (after 1 sec.).
* PEDESTRIAN START and START controls have identical functioning, but the pedestrian stroke is reduced. The START input
has priority over the pedestrian function.
0 -
(*)
AUTOMATIC MODE
AUTOMATION STATE
closed
open (pause)
closing
opening
locked using STOP
1 -
FOUR STEPS
(*)
Identical functioning to Automatic mode apart from the following differences:
open (pause)
2 -
SUPER AUTOMATIC
(*)
Identical functioning to Automatic mode apart from the following differences: regardless of the movement phase, START
reverses the direction
open (pause)
opening
3 -
-
SEMI AUTOMATIC WITH STOP
(*)
AUTOMATION STATE
closed
open
closing
opening
locked using STOP
4 -
STEP BY STEP
(*)
AUTOMATION STATE
closed
open
closing
opening
locked using STOP
SLIDE 230
Lo 0
. )
START STOP CLOSING SAFETY
prevents
opens
opening
- locks
1 prevents closing (
re-opens locks 1
- locks 1
closes -
START within 3 seconds of opening
START closes ignoring the pause time
START closes again
START STOP CLOSING SAFETY
prevents
opens
opening
closes locks
1
prevents closing (
re-opens locks
1
locks 1 locks 1
closes -
START STOP CLOSING SAFETY
prevents
opens
opening
closes locks 1
prevents closing (
locks
locks
1
(START
opens again)
locks 1 locks 1
closes -
the gate opens completely
INPUT
SAFETY EDGE
- prevents opening
Ad
prevents closing
)
reverses 2 sec. and
re-opens
reverses 2 sec. and
-
-
locks the open automation; a further START
INPUT
SAFETY EDGE
- prevents opening
Ad
prevents closing
)
reverses 2 sec. and
re-opens
reverses 2 sec. and
-
-
INPUT
SAFETY EDGE
- prevents opening
Ad
prevents closing
)
reverses 2 sec. and
re-opens
reverses 2 sec. and
-
-
- 21 -
CONTROL UNIT
remains open for
AUXILIARY SAFETY
PHOTOCELL
prevents opening
prevents closing as
long as it is covered
locks
locks
locks
locks
- -
AUXILIARY SAFETY
PHOTOCELL
prevents opening
prevents closing (
locks
locks
locks
locks
- -
AUXILIARY SAFETY
PHOTOCELL
prevents opening
prevents closing (
locks
locks
locks
locks
- -
2
2
closes
Ad
)
2
2
Ad
)
2
2