Opening The Product - Atlantic EGEO Notice D'utilisation Et D'installation

Presentation

6. Opening the product

6.1. Access to the heat pump
Press with a flat screwdriver to unclip
6.2. Access to electronic components
6.2.1. Heat pump side
Remove the
ferrule
6.2.2. Cover side
Method 1:
1. Unscrew the cover
2. Lift the cover then slide it
upwards to remove it
❷
❶
50
Installation
the top of the trim
Take care when
disconnecting
the earth cable
Use Maintenance
Remove the top of the trim
Method 2:
1. Unscrew the cover
2. Pull on the cover via the
Warranty
Remove the upper air duct
notches