Saeco IDEA CAP002A Mode D'emploi Et D'entretien page 180

English
• Remove the coffee beans on the grinder's top with a
vacuum cleaner.
F. 19
• Remove the screws (D).
• Remove the gearwheel (E).
D
F. 20
• Unscrew and remove the adjustment ring nut (F) and cle-
an both grinders with a vacuum cleaner and a brush.
Check the grinder's degree of wear. In case of manifest
damages, they must be replaced.
F. 21
To re-assemble the coffee grinder unit, do as follows:
• Screw fully the adjustment ring nut (F), then unscrew it
by 1/2 turn.
This 1/2 turn untightening of ring nut is necessary to
avoid grinders jamming and damage.
180
F. 22
• Replace the gearwheel (E) and fix it tightening the screws
• Replace the coffee bean hopper (H).
D
• Fix the container (H) tightening the screws (B) with the
E
F
F. 23
F
(D).
Be careful to place the gasket properly (G). It has
to correctly engage with the gearwheel (E) and the
ring nut (F).
appropriate tool (C).
B
E
G
F
B
E
G
F
C
H
Mod. LUXE
Mod.COFFEE
Mod. CAPPUCCINO
C
H
Mod. 2 GRINDER UNIT