Heating And Cooking; Microwave Operation - SilverCrest SMW 800 B2 Mode D'emploi

Heating and cooking

Microwave operation

Notice!
During the cooking process, drops of water can
form on the oven door or on the housing. This is normal
and is not an indication of a malfunction.When the
appliance has cooled down, wipe the moisture off
with a dry cloth.
Risk of fire!
Never use the grill stand t or other metallic objects
when you are using the appliance in the microwave
mode. Metals reflect the microwave radiation and it
leads to the generation of sparks. This could cause
a fire and irreparably damage the appliance!
Selecting the operation level
Press the button Operation r
•
priate number of times to set the required power
level.
• 1x for 800 Watts of power (P800).
• 2x for 700 Watts of power (P700).
• 3x for 600 Watts of power (P600).
• 4x for 500 Watts of power (P500).
• 5x for 400 Watts of power (P400).
• 6x for 300 Watts of power (P300).
• 7x for 200 Watts of power (P200).
• 8x for 100 Watts of power (P100).
The power setting level is indicated in the display 1
(e.g. P800 at 800 Watts of power).
Programming the cooking time
After you have selected the power level, programme
in the desired cooking time:
Turn the control dial q, until the desired coo-
•
king time has been programmed in.
The increments for setting the time with the control
dial q are as follows:
• from 10 sec. to 5 min: in 10 second increments
• from 5 to 10 min: in 30 second increments
• from 10 to 30 min: in 1 minute increments
• from 30 to 95 min: in 5 minute increments
Aborting/stopping an input process
Press the button Stop 0
input of data. The appliance reverts to standby mode.
Starting the cooking process
When you have programmed in the power level
and the cooking time, and the symbol
the display 1, you can start the cooking process:
To start the cooking process, press button Start/
Quickstart q
bols for microwave operation
(Power P100 - P400) or
The programmed time starts to count down.
the appro-
Interrupting the cooking process
Press the button Stop 0
cooking process. The appliance interrupts the coo-
king process and stops the remaining time. Press the
button Start/Quickstart q
cooking process.
Abort the cooking process
Press the button Stop 0
king process. The appliance reverts to standby mode.
Cooking process is finished
When a cooking process is complete, "End" appears
in the display 1 and 4 signal tones sound. If the
door of the microwave is not opened, the signal
tones sound again after about 2 minutes.
- 64 -
once to cancel or end
.In the display 1 appear the sym-
and cooking
(Power P500 - P800).
once to interrupt a
to continue the
twice to stop the coo-
blinks in