Recall Memory; Clear The Saved Data; Instrument Setup Menu - XS Instruments pH 60 VioLab Manuel D'utilisation

 Recall Memory
 In measure mode in the parameter of interest, press key
The last saved data is shown on the display.
As indicated by the string

The number next to the M+ icon indicates the save slot.
Press to return to measure mode.

 Clear the saved data
To clear the data stored in the instrumental memory, access the CLEAR DATA P8.2 setup menu and

select YES.
IMPORTANT: Factory reset of the pH, ORP and Cond parameters does not delete the stored data.

Instrument Setup Menu

 In measure mode press key
Use the directional keys to move to SETTINGS P9.0 and access the menu by pressing the key

 Move with the keys
The table below shows the setup menu structure for the general settings of the instrument; for each
program, there are the options that the user can choose and the default value:
Program Description
P9.1 TEMPERATURE U.M.
P9.2 DATE AND TIME SET
P9.4
BRIGHTNESS
P9.6*
SELECT PARAMETER
P9.8 RESET
* Function available for PC 60 VioLab only
P9.1 Temperature Unit
Access this setup menu to select the temperature unit to use.
 °C -default-
°F

P9.2 Date and time setting
Access this setup menu to update the device date and time.
Use the directional keys to change the year, confirm with
day, hours and minutes.
IMPORTANT: Date and time and all GLP data are kept even in case of sudden power failure.
P9.4 Brightness
Access this setup menu to choose between three different levels of display brightness.
 LOW – low
 MEDIUM – medium
HIGH – high

UM Serie 60VioLab rev.0 20.05.2020
, use the directional keys to scroll through the different stored values.
to access the SETUP menu.
and to select the program to access.
°C / °F
-
LOW – MEDIUM - HIGH
YES – NO for each parameter
YES - NO
32
to enter the RECALL MEMORY mode.
Options Factory Default Settings
and repeat the same operation for month,
.
°C
-
MEDIUM
YES
NO
EN