Setup For Data Logger Parameter - XS Instruments pH 60 VioLab Manuel D'utilisation

 Setup for Data Logger parameter
In measure mode press button

 Use the directional keys to move to LOG SETTINGS P8.0 and access the menu by pressing the key
.
Move with the keys

The table below shows the setup menu structure for the Data Logger mode; for each program, there are
the options that the user can choose and the default value:
Program Description
P8.1
TYPE OF SAVING
P8.2 EMPTY INTERNAL MEMORY
P8.3 SAVING DESTINATION
P8.4
PRINT FORMAT
P8.1 Datalogging
Access this menu to select the data acquisition mode:
MANUAL: The data is acquired only when the user presses the button

HOURS - MINUTES: Set an automatic data acquisition frequency range.

Use the directional keys to move from MANUAL to HOURS or MINUTES. Access with
indicated by the icon
.
Use of automatic Data Logger

In measure mode press
When the automatic data saving is running, the icon
When it is set, but not in operation, the icon on the screen remains fixed. When the 1000 total values are
reached, the recording stops automatically.
Note: Scrolling through the parameters, the recording stops.
P8.2 Memory emptying
Access this menu and select YES to clear the saved data and empty the memory.
Next to the M+ icon. It shows the total number of data stored.
P8.3 Saving destination
Access this menu to select the destination for saving the recorded values:
MEMORY: -default setting- The recorded data is saved in the internal memory of the device. This series

of instruments can store up to 1000 data in total, the progressive registration number appears next to
the M+ icon.
IMPORTANT: If you are working with the DataLink + software active, the data is automatically saved on the
PC and NOT on the instrument's memory
PRINTER: The data are printed directly on an external printer connected via the RS232 port (see

outputs connections). Access menu P8.4 to select which information to print in the header.
UM Serie 60VioLab rev.0 20.05.2020
to access the SETUP menu.
and to select the program to access.
MANUAL – HOURS - MINUTES
YES – NO
MEMORY - PRINTER
SIMPLE - COMPLETE
, change the value of the acquisition time. Confirm the setting with the key
to start and end automatic recording.
30
Options
.
flashes on the display.
Factory Default Settings
MANUAL
-
MEMORY
SIMPLE
and, as
EN