Instrument Transportation; Key Functions - XS Instruments pH 60 VioLab Manuel D'utilisation

settings relating to the most important parameters and possible information about the DHS sensor;

On first use, and after each battery replacement, the instrument during the start-up phase will request the
updating of the date and time.
 Using the directional keys, update the year and confirm with the key
operation with the month and day, and subsequently with hours and minutes.
 The instrument will enter measure mode in the last parameter used. To switch off the instrument, press
the key in measure mode.
 Instrument transportation
To move the instrument to a new location, ship it carefully to avoid damage; the instrument can be
damaged, if it is not transported correctly.
Disconnect the instrument from the power supply and remove all the connection cables. Remove the
electrode arm from its holder.
 To avoid damage to the instrument during long distance transport, use the original packaging.
If the original packaging is no longer available, choose a package that guarantees a safe shipment.

 Key functions
Button Pression Function
Press to turn the device on or off.
Short
In measure mode, press to scroll through the different parameters:
 pH 60 VioLab : pH  mV  ORP
Short
 COND 60 VioLab: Cond  TDS  Sal
 PC 60 VioLab: pH  mV  ORP  Cond  TDS  Sal
 In calibration, setup and memory recall mode, press to return to measure mode.
Short
 In measure mode, press to start the calibration.
In measure mode, press to enter the setup.
Short
In the setup menus, press to select the desired program and / or value.
During calibration, press to confirm the value.
In the setup and subset menus press to scroll
In the setup submenus, press to change the value
In memory recall mode, press to scroll through the saved values.
In MTC and custom calibration mode, press to change the value.
Short
In measure mode, keep one of the two keys pressed to change the temperature in MTC
mode (manual compensation, without probe). When the value starts to flash, the user
Long-
can change the temperature value by entering the correct one and confirming with
Press (3s)
The correct use of the function keys and the attention in pressing them, given the small size, eliminates the
residual risk of minor damage, not probable, caused by simultaneous pressing of the keys; before using the
instrument, check that pressing the keys has the corresponding effect on the display.
UM Serie 60VioLab rev.0 20.05.2020
: In measure mode, press to save the data or print.
: In measure mode, press to recall the saved data.
.
11
. Carry out the same
EN