Russell Hobbs 18277-56 Mode D'emploi page 3

drawing
1 grinder
2 peppercorns
3 grip
4 motor unit
X batteries
adjust the grind
28 Turn the knob right till it won't go any further.
29 Now turn it left a little.
30 Press and release the switch.
31 Check the grind size, and adjust till it's the way you want it.
32 Don't turn it more than 6 complete turns towards c, or you may unscrew the knob from the
spindle.
grinding
33 Hold the appliance with the grinder you want to use at the bottom.
34 The motor unit should slide down, inside the handle, to engage with the bottom grinder.
35 If it sticks, give the appliance a gentle shake.
36 Press the switch to start the motor, release it to switch off.
care and maintenance
37 Wipe the outside of the grinders with a clean dry cloth.
38 Don't let them get wet or damp, and don't use detergent.
wheelie bin symbol
To avoid environmental and health problems due to hazardous substances in
electrical and electronic goods, appliances marked with this symbol mustn't be
disposed of with unsorted municipal waste, but recovered, reused, or recycled.
5 contact plate
6 handle
4 switch
7 stand
8 spindle
9 knob
3
c coarse
f fine
10 press
11 unlock
12 lock