Safety information
This electrical cutting device fulfills the applicable stan-
dards of European and national guidelines and has been
constructed in accordance with state of the art technolo-
gy. Pay close attention to the instructions and information
contained in the operating instructions in order to ensure
safe utilisation.
CAUTION: Read all the safety information and instruc-
tions. Non-observance of the warnings and instructions
can result in an electric shock, fire and/or serious injuries.
The term "electric power tool" used in the safety instruc-
tions refers to mains-powered (corded) or battery-powered
(cordless) electrical power tools.
Safety in the work area. Keep the work area clean and
well lit.
Do not use the device in explosive areas, for example in
the vicinity of flammable liquids, gases or dust. Electrical
power tools can generate sparks that can lead to highly
flammable materials igniting.
Keep a safe distance from children and other persons
when working using this electrical power tool. Distrac-
tions can cause accidents.
Electrical safety. The connector plug provided with the
power supply must fit into the plug socket. Do not modify
the plug under any circumstances. Do not use adapter
plugs with earthed electrical power tools.
Avoid body contact with earthed surfaces, such as heating
pipes, stoves and refrigerators. The risk of electric shock
is increased if you body is earthed.
Only use the electrical device indoors. Do not expose
the device to rain or moisture under any circumstances.
Ingress of water into the electrical power tool can increase
the risk of an electric shock.
Do not overstretch the power supply cord. Do not use the
cord to carry or pull the electrical power tool. Keep the
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of an
electric shock.
Personal safety
Be careful when using the cordless shears. Do not use
the shears if you are tired or under the influence of drugs,
alcohol or medication. A single moment of carelessness
when operating the electrical power tool may result in
serious injuries.
Use personal protective equipment. Always wear eye pro-
tection. Using protective equipment, such as dusk masks,
non-slip safety shoes or hearing protection, help to avoid
injuries.
Avoid accidental starting. Make sure that the switch in
the Off position before connecting a power source. Make
sure not to accidentally press the switch when carrying
the shears. Risk of injury!
35
Original instruction