Inserting Your Mobile Phone Into The Car Cradle; Charging The Mobile Phone - Tronic TKHU 2 A2 Mode D'emploi

To remove the car cradle, pull the lever 1 towards
♦
the car cradle and hold it in place .
Unhook the hook 2 and pull it through the ventila-
♦
tion slots .
Inserting your mobile phone into the
car cradle
Back
♦
Place your mobile phone on the supports 8 of the
♦
car cradle .
Push the car cradle fixer grips 6 inwards until the
♦
mobile phone is held firmly in place .
Press the PRESS button 7 to remove the mobile
♦
phone from the car cradle .

Charging the mobile phone

Connect the car USB adapter 0 to your vehicle's
♦
on-board power supply (cigarette lighter) . The
operating LED e lights up white to indicate that
the car USB adapter 0 is ready for use . It is
possible that the ignition has to be switched on
first depending on the vehicle type .
│ GB │ IE
■ 14
Press the PRESS button 7 on the rear of
the device and the fixer grips 6 of the
car cradle automatically move outwards .
TKHU 2 A2