Troubleshooting - Tronic TKHU 2 A2 Mode D'emploi

Troubleshooting

A connected device will not charge (the white
operating LED e does not light up).
No connection to the car's cigarette lighter socket .
♦
Check the connection .
Depending on the vehicle type, it is possible that
♦
the ignition has to be switched on first .
The white operating LED e goes out after a
device has been connected
The car USB adapter 0 is overloaded and will no
♦
longer charge attached devices . The internal over-
current protection has been triggered . Disconnect
all connected devices from the car USB adapter 0 .
The white operating LED e lights up immediately
and the car USB adapter 0 is ready for use again .
NOTE
If you cannot solve the problem with the suggest-
►
ed solutions, please contact the Service Hotline
(see section Service) .
│ GB │ IE
■ 16 TKHU 2 A2