Fein Slugger JCM 200 QX Mode D'emploi page 19

OBJ_BUCH-0000000130-003.book Page 19 Thursday, December 15, 2016 1:40 PM
Activating and deactivating the cool-
ant-lubricant flow (figure 13).
To activate the cooling-lubricant flow,
open the ventilation first and then turn
the flow valve to the position shown.
For switching off or when working
overhead, deactivate the cooling-lubri-
cant flow. Shut the ventilation and turn
the flow valve to the position shown.
When working overhead, use a cooling-lubri-
cant paste from Slugger.
Fig.13
1.
Ventilation
2.
en
19
Cooling-
lubricant paste