Master Forge GBT13039L Instructions Pour L'utilisation Et L'installation page 10

ASSEMBlY iNStruCtiONS
6. Attach the left side handle (I), right side handle (L)
and heat plate supports (J) to the bottom bowl (K)
using two sets of two 6 mm heat resistant washers
(II), two 5 mm washers (GG), two 5 mm lock
washers (JJ) and two M5 wing nuts (EE).
Hardware used
M5 Wing Nut
EE
GG 5 mm Washer
6 mm Heat
ii
Resistant Washer
5 mm
JJ
Lock Washer
7. Attach left leg (P) and right leg (Q) to the bottom
bowl (K) using four sets of M6 x 15 mm large
screws (CC), 6 mm washers (HH) and 6 mm lock
washers (KK).
Hardware used
M6 x 15 mm
CC
Large Screw
6 mm Washer
HH
6 mm Heat
KK
Resistant Washer
8. Attach the burner (E) to the bottom bowl (K) using
M6 x 15 mm large screw (CC).
Attach igniter wire (M) to burner (E).
Attach regulator/control knob (O) to burner (E).
Hardware used
M6 x 15 mm
CC
Large Screw
6
x 4
x 4
x 4
x 4
7
x 4
x 4
x 4
8
x 1
Lowes.com/masterforge
10 ®