Using the Touch Pen
Flat end
Precautions for Disposal
E
<For Europe and U.S.A./Canada>
Attention Customers
Don't remove the battery by yourself. The battery must be removed by qualified
professionals. When disposing of this product, be sure to contact qualified
professionals to remove the battery.
Attention Qualified professionals to remove the battery
Dispose of this product correctly in accordance with the local regulations after
removing the battery as shown in the following procedure.
Never disassemble this product except when it is disposed of.
The following illustrations are used to explain for disposing of
The product cannot be recovered once disassembled.
■ How to remove the battery
Preparation
Set the Touch Pen to the Power-off Mode (page 13).
1
Use a precision Phillips (plus ⊕) screwdriver to remove the
screw shown below.
14
1
Clasp the worn tip with a tool such as
needle nose pliers, and pull it out in the
direction of the arrow.
2
Clasp the replacement tip with your
fingers, and insert it straight into the
Touch pen, flat end first.
● Insert the tip until it is securely fixed.
this product and are not for repair.