Using The Touch Pen - Panasonic UT-VNP5000WU Instructions D'utilisation

Using the Touch Pen

Remove the cap before using.
Charging
Charge the battery beforehand when using the Touch Pen for the first time after
purchase or if the Touch Pen has not been used for a long period of time.
Connect the charging terminal of the Touch Pen to the USB terminal of the PC using
the supplied charging cable.
● Refer to the specifications for the approximate charging time.
● Turn on the PC before charging. Charging cannot start with the PC turned off.
● The Touch Pen can be used while charging.
● Folding the cable at the joint which connects the charging cable and the Touch Pen
may cause contact failure.
● Charging is possible approx. 500 times.
● Charge the Touch Pen using a model compatible with this product. Otherwise,
charging may not be possible or may take longer time.
Registration
Registration is required when using the Touch Pen for the first time after purchase or
using it with another PC.
1
Turn on the PC to be used and enable Bluetooth.
(Windows 8.1)
① Display the charm and touch
[Airplane mode
② Confirm that [Airplane mode] is [OFF] and [Bluetooth] is [ON].
(Windows 7)
① Click
on the notification area and place the cursor over the Wireless
Switch Utility icon (
Confirm that Bluetooth is ON.
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these
instructions are different from the actual screen messages. For example,
[Flight mode] may be displayed instead of [Airplane mode] in some
language preference.)
2
Connect the Touch Pen to the PC using the charging cable only
when using the Touch Pen for the first time after purchase.
3
Press the Button 1 and Button 2 for 5 seconds or more.
Confirm that "DISCOVERABLE" appears on the display.
- [Change PC Settings] - [Network] -
].
*1
or ).
E
11