Panasonic UT-VNP5000WU Instructions D'utilisation page 12

Using the Touch Pen
4
Register the pen to the PC.
(Windows 8.1)
① Display the charm and touch
- [Bluetooth].
② Touch [Panasonic Touch Pen] under [Manage Bluetooth devices] and touch
[Pair].
(Windows 7)
① Touch
New Connection].
② Touch [Next], select [Panasonic Touch Pen] in Device Name.
Follow the on-screen instructions.
• "CONNECTING" is shown on the display during registration.
E • Put the Touch Pen within the distance of 80 cm from the PC during
registration.
• If the registration is not successful even after 2 minutes, repeat from step 3.
• Confi rm that "CONNECTED" appears on the display.
CAUTION
● Turning the Touch Pen on after registration near the PC which is turned on
will connect to the PC automatically.
● If the registration is canceled on the PC side, register the Touch Pen again.
How to use the Touch Pen
■ Power
Holding the Touch Pen will automatically turn the power on and light up the display.
● Holding the Touch Pen with a glove on the hand may not turn the power on.
■ Operation
Operation examples are shown below. Operation methods may differ depending on
the application to be used.
Operation example
Tap
12
on the notifi cation area and long touch
How to move
Touch the pen tip to the panel
and release it quickly.
- [Change PC Settings] - [PC and devices]
, and then touch [Add
Select the item.
Description