Using The Appliance - AYA ACT1000A+ Instructions D'utilisation

USING THE APPLIANCE

This appliance is designed for domestic use only, specifically for the storage of edible
foodstuff. This appliance is designed to operate in ambient temperatures (surrounding
or warmer, the appliance will not operate correctly. Should the ambient temperatures
°C
Remove all securing tapes. Wash the inside of the appliance with lukewarm water
with a little bicarbonate of soda added (5ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry the appliance thoroughly.
1.Allow the appliance to stand for 2 hours after installation.
2.Plug in the appliance and switch on at the mains supply.
suitable for normal operation (see thermostat control).
reached before placing food inside.
The thermostat control situated in the control panel regulates the temperature of the
Position "Min" –Cold.
Position "Normal" -Colder.normally, setting at this position.
Position "Max" –Coldest.
The temperature will be affected by:
Room temperature
How often the door is opened
How much food is stored
Position of the appliance
In determining the correct temperature control setting, all these factors have to be
considered and some experimentation may be necessary. Do not allow children to
tamper with the controls or play with the product.
:
°C °C
- 21 -