Disconnecting From Your Pc - Olympus DS-2500 Mode D'emploi

Disconnecting from your PC

Windows
1
Click [ ] on the task bar located at the
lower-right corner of the screen. Click
[Safely remove USB Mass Storage
Device].
• The drive letter will differ depending on the
PC being used.
2
Confirm that the record indicator light
turns off before disconnecting the USB
cable.
Macintosh
1
Move the icon of the recorder's drive
displayed on desktop to trash box by
drag and drop.
2
Disconnect the USB cable.
Connecting recorder to PC
Notes
• NEVER remove the card or disconnect the USB
cable while the record indicator light is fl ashing. If
you do, the data on the card will get destroyed.
• Some PC's may not supply suffi cient power and
the recorder fails to connect. Refer to your PC
user's manual regarding the USB port on your PC.
• Do not connect the recorder to a PC by using a
USB hub. Make sure to connect to a USB port on
your PC.
• Make sure to push the cable connector all the
way in. Otherwise, the recorder may not operate
properly.
• This is an operational environment for saving the
fi les recorded by this recorder to your PC with USB
connection.
• Even if operational environment is satisfi ed, we
do not support upgraded OS, the multi-boot
environment or self-modifi ed computers.
4
EN
57