Technical Characteristics - GYS PRESS 10T PUSH-PULL Mode D'emploi

USING COMPRESSED AIR
Never exceed the maximum air pressure listed on the back of the machine and in this manual.
Pressurised air can cause serious injuries. Disconnecting the machine from its compressed air supply is strongly recom-
mended before changing the arm or consumable.
Never carry the riveter by the hose.
REPLACING ARMS AND CONSUMABLES
Use only the arms and consumables specifically recommended by GYS.
NOISE
Weighted sound power level: LWA = 78 dB.
DISPOSING OF THIS DEVICE
When disposing of the GYSPRESS 10T PUSH-PULL, it must not be dumped in the natural environment and must be taken
to an authorised recycling centre.
SETUP - OPERATING THE DEVICE
DESCRIPTION
This riveting machine has been developed specifically for installing the main rivet types used and approved in the auto-
motive repair industry:
• Self-piercing rivets or 'Punch Rivets'
• 'Flow Form' rivets
Ideal for all sheet metal riveting applications (up to 8.3 mm thick).

TECHNICAL CHARACTERISTICS

Weight of the riveting machine
Max. air network pressure
Max. clamping force
HANDLING
The correct handling procedures are explained in this user manual. It is vital that the GYS operating procedures are
followed.
COMPRESSED AIR CONNECTION
Maximum air pressure:
Make sure that the air pressure does not exceed 10 bar.
Clean compressed air:
Make sure you use only clean and dry compressed air for supply the riveting machine. Moisture
and impurities can lead to system failures and/or damages on the product.
GYSPRESS 10T PUSH-PULL
3.9 kg
10 bar - 145 psi
100 kN
EN
15