Sauder Costa 419954 Mode D'emploi page 29

Step 25 Step
Insert a SLIDE CAM (10A) into the SMALL DRAWER SIDES (D24 and D25).
å
Fasten two EXTENSION SLIDES (40NC) to the SMALL DRAWER SIDES (D24 and D25).
å
Use two BLACK 1-9/16" FLAT HEAD SCREWS (30S) through holes #1, through the SMALL
DRAWER SIDES, and into the SMALL DRAWER BACK (D109). Use two GOLD 5/16" FLAT
HEAD SCREWS (3S) through hole #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Repeat this step for the other SMALL drawers.
å
2
3
www.sauder.com/services
Open end
10A
1
D25
(2 screws per drawer)
3S
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D109
D24
2
3
419954
Open end
1
(2 screws per drawer)
30S
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
Page 29