Sauder Costa 419954 Mode D'emploi page 10

Step 6
First, fi ll two holes in the ENDS (A and B) 1/4 to 1/2 full with GLUE (177M). Then,
å
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
NOTE: Be sure to position the parts exactly as shown.
å
Now, fi ll the holes in the FRONT LEGS (H and P) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the FRONT LEGS (H and P) to the ENDS (A and B). Tighten six
å
HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the ENDS insert into the FRONT LEGS.
å
Wipe away the excess GLUE.
15F
These surfaces
should be even.
S u r
T W
F A S
Page 10
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
P
B
f a c
e w
i t h
I S T
- L O
C K
T E N
®
E R S
H
A
S u r
f a c
e w
T W
i t h
I S T
- L O
F A S
C K
T E N
®
E R S
End with hole
1
Edge with
TWIST-LOCK®
FASTENERS
2
419954
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
End without hole
15F
www.sauder.com/services