Publicité
Step 9
First, fi ll two holes in the FRONT LEGS (H and P) 1/4 to 1/2 full
å
with GLUE (177M). Then, insert two WOOD DOWELS (15F) into
the holes. Wipe away the excess GLUE.
Now, fi ll the holes in the UPRIGHTS (D and E) 1/4 to 1/2 full
å
with GLUE (177M).
Fasten the FRONT LEGS (P and H) to the UPRIGHTS (D and E).
å
Tighten six HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the FRONT LEGS insert
å
into the UPRIGHTS. Wipe away the excess GLUE.
15F
www.sauder.com/services
Edge with
TWIST-LOCK®
FASTENERS
E
S u r
f a c
e w
T W
i t h
I S T
- L O
F A S
C K
T E N
®
E R S
H
These surfaces
should be even.
S u r
f a c
e w
T W
i t h
I S T
- L O
F A S
C K
T E N
E R S
Edge with
TWIST-LOCK®
FASTENERS
End with hole
419954
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
D
®
P
These surfaces
should be even.
End without hole
15F
Page 13
Publicité
