Publicité
Step 8
First, fi ll two holes in the UPRIGHTS (D and E) 1/4 to 1/2 full with GLUE (177M).
å
Then, insert two WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
NOTE: Be sure to position the parts exactly as shown.
å
Now, fi ll the holes in the REAR LEGS (Q and R) 1/4 to 1/2 full with GLUE (177M).
å
Fasten the REAR LEGS (Q and R) to the UPRIGHTS (D and E).
å
Tighten six HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the UPRIGHTS insert into the REAR LEGS.
å
Wipe away the excess GLUE.
15F
These surfaces
should be even.
S u r
T W
F A S
Page 12
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
Q
E
f a c
e w
i t h
I S T
- L O
C K
T E N
®
E R S
R
D
S u r
f a c
e w
T W
i t h
I S T
- L O
F A S
C K
T E N
®
E R S
End with hole
Edge with
TWIST-LOCK®
FASTENERS
419954
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
End without hole
15F
www.sauder.com/services
Publicité
