Finishing; Bricks And Baffles Installation - Napoleon EPI 1101 Instructions D'installation Et D'opération

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.0 FINISHING

5.1

BRICKS AND BAFFLES INSTALLATION

OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE TEMPERA-
TURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING ENCLOSURE.
A.
Install (1101) four (A) bricks and one (C) brick or (1402) six (A) bricks along both sides of the
appliance. Before installing the back bricks, loosen the screw holding the retainer and ensure that it
has been moved forward. Install the four (A) bricks and two (D) bricks along the back wall by pivoting
the bricks up under the brick retainer. Retighten the screw. NOTE: Center (D) bricks have been
notched.
B.
Carefully pivot fi bre baffl e (G) and (H) up onto the top of the side brick. Slide it over onto the fl ange
of the manifold. Ensure that the top baffl es are pushed all the way to the rear of the fi rebox, leaving a
minimum of a 1" gap along the front. This will allow the fl ue gases to escape the fi rebox.
C.
Install the bottom (1101) four (A) bricks and two (B) bricks or (1402) six (A) bricks and two (B) bricks,
working from the back of the appliance forward.
D.
Install the two (B) bricks, one (E) brick and one (F) brick along the front as illustrated.
NOTE: Do not operate if baffl e and manifold shield are not in position.
FIREBRICK
DIMENSIONS
4 1/2" x 9"
A
(114mm x 229mm)
3" x 9" (Molded)
B
(6mm x 229mm)
4 1/2" x 4 1/2"
C
(114mm x 144mm)
3" x 9"
D
(76mm x 229mm)
1101
A
C
A
A
A
A
A
G
B
H
B
1101& 1402 (All Firebricks are 1 1/4" (32mm) Thick)
PART #
1101
1402
W090-0001
W090-0001
X16
X22
W090-0002
W090-0002
X2
X2
W090-0003
N/A
X2
W090-0166
W090-0166
X2
X2
BRICK
RETAINERS
E
(Fibre Baffles)
W018-0077 X2
A
F
A
A
A
A
D
A
D
C
A
A
A
A
A
NOTE: BRICKS
NOTCHED AT
WARNING
!
FIREBRICK
DIMENSIONS
4 1/2" x 9"
E
(Notched)
(114mm x 229mm)
4 1/2" x 9"
F
(Notched)
(114mm x 229mm)
2 1/4" x 9"
G
(57mm x 229mm)
2 1/4" x 6 1/8"
H
(64mm x 121mm)
A
A
A
A
A
A
G
E & F ARE
B
REAR.
F
E
PART #
1101
1402
W090-0207
W090-0207
X1
X1
W090-0208
W090-0208
X1
X1
W090-0018
W090-0018
X1
X1
W090-0019
W090-0019
X1
X1
1402
BRICK
RETAINERS
(Fibre Baffles)
E
W018-0078 X2
F
A
A
A
A
D
A
A
D
A
A
A
A
A
A
A
A
A
A
H
B
W415-0764 / C / 11.19.13
13
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Epi 1402

Table des Matières